H22 not starting
 

I had a set of fuel injectors die on me, so I used 2 different sets of dsm 450's with the resistor box correctly wired up, becaue I thought the first set of dsm were bad. I'm getting spark, I pulled the wires and put plugs in it and turned it over and they were arcing. I'm getting fuel, when I pulled the plugs they were wet, and i'm having a leak at the rail. I also check the three grounds on the motor and trans. The only possible thing I could think of is that my resistor box has died? but then it should atleast start. I got it to turn over once and only once, and it sounded like it was on 2 cylinders. I check and rechecked the firing order. I'm running a jdm h22 with skunk2 pro 1 cams I/H/E with dsm 450's with a phearable.net chip, which is set up for the dsm's. What else could be preventing it from starting? I'm also not having any check engine lights either.

check your timing. simply just put ur motor at tdc. Then take off ur dizzyy , see if its pointing at cylinder 1.