gsr swap almost done.. just a couple dumb questions left!
05-07-2008, 11:54 AM
#1
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
gsr swap almost done.. just a couple dumb questions left!
on the hf engine the engine coolant sensor is on the back of the block.. right? next to the oil filter?
if im not mistaken there were 2 sensors back there.. one of them a 1 wire.. and the other was a 2 wire?
on the gsr engine.. are those 2 sensors under the dizzy?
one stupid question at a time.
thanks,
lol
if im not mistaken there were 2 sensors back there.. one of them a 1 wire.. and the other was a 2 wire?
on the gsr engine.. are those 2 sensors under the dizzy?
one stupid question at a time.
thanks,
lol
05-07-2008, 11:59 AM
#2
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: gsr swap almost done.. just a couple dumb questions left!
wait.. the ones in the back of the block were oil pressure sensors....
i guess on the hf engine the coolant temp sensors are in the same place as they are on the gsr engine.. hmmm
i guess on the hf engine the coolant temp sensors are in the same place as they are on the gsr engine.. hmmm
05-07-2008, 12:14 PM
#3
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: gsr swap almost done.. just a couple dumb questions left!
ok i figured out the first sensor the 1 wire one.. just got it hooked up.. now i need to confirm the 2nd one.. i cant seem to find it in the manual.. ive circled it here.. right next to the coolant temp sensor.. what is it called?
05-07-2008, 12:28 PM
#4
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: gsr swap almost done.. just a couple dumb questions left!
here is that sensor on the hf engine
its got 2 wires.. one solid yellow, and one green/black
here the the sensor PLUG on the gsr side.. sensor already in the block..
its also got 2 wires.. one solid green, and the other yellow/red
so basically i need to know if its green/black to solid green and solid yellow to yellow/red
or green/black to yellow/red and solid green to solid yellow
its got 2 wires.. one solid yellow, and one green/black
here the the sensor PLUG on the gsr side.. sensor already in the block..
its also got 2 wires.. one solid green, and the other yellow/red
so basically i need to know if its green/black to solid green and solid yellow to yellow/red
or green/black to yellow/red and solid green to solid yellow
05-07-2008, 12:44 PM
#5
3.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 9,282
Re: gsr swap almost done.. just a couple dumb questions left!
identified the ------- sensor 
apparently its the engine coolant temp sensor.. thats the 2 wire one..
and the one wire one is the sending unit for that sensor
ok so sweet now i need to sift through hundreds of more pages and then trace the wires back to know which is which
or someone who knows could just ------- hit that reply button and tell me
apparently its the engine coolant temp sensor.. thats the 2 wire one..
and the one wire one is the sending unit for that sensor
ok so sweet now i need to sift through hundreds of more pages and then trace the wires back to know which is which
or someone who knows could just ------- hit that reply button and tell me
05-07-2008, 02:04 PM
#9
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re: gsr swap almost done.. just a couple dumb questions left!
Originally Posted by buk9tp
here is that sensor on the hf engine
05-07-2008, 10:31 PM
#10
0.0 BAR
Join Date: Oct 2005
Posts: 0
Re: gsr swap almost done.. just a couple dumb questions left!
buk, you're not going to hurt anything if you don't have a sensor hooked up or switched or whatever. Worst case scenario is that it wont start, 2nd worse is that it runs weird, both of which can be troubleshooted (is that a word??) by cel or by tinkering. Stop looking at diagrams and go see what fits in what socket.
