Gsr cluster in Eg's write up
#1
Gsr cluster in Eg's write up
well I kind of made a write up for putting a gsr cluster in the eg's, don't know if anyone is interested. This works well for people that have the dx eg's since they don't have a tach and want to upgrade to a gsr cluster. Let me know if anyone might be interested and ill post it. 98ctr
Parts needed:
-Gsr cluster from any Integra Gsr 96-00
-Gsr plugs for the cluster (from your local junk yard)
(the pins from the 5g civic will not work on the gsr plugs so you need the two plugs and about 4" of the wires so you can cut and solder to the civic harness)
-Solder and solder gun, I will encourage to solder and shink tube all the connections. Do it right the first time and you wont regret it later.
-Dremmel tool. You will need to cut the top of the gsr cluster to be able to fit back your civic panel back into place.
-Two zip ties or you can fabricate two small brackets to screw the gsr cluster in the civic mounting holes (gsr cluster is a bit longer so the zip ties works grate)
Steps:
1. Remove civic panel
2. Remove civic cluster
3. Cut and solder wires ONE AT A TIME so you don't get confused in all the mess
4. Trim top mounting bracket on the gsr cluster
5. Use tow zip ties to place gsr cluster in place of the civic cluster
6. Trim civic panel on the left and right side so it clears the gsr cluster
7. Put back the panel and enjoy your new DIY mod.
Here is the wiring:
integra 13 pin plug to civic plug
1a--blu to 8a--blu
2a--grn/org to 5b--grn/org
3a--yel/red to 6a--yel/red
4a not used
5a--wht/blu to 5a--wht/blu
6a not used
7a--yel/grn to 7b--yel/grn
8a--blk to 6b--blk
9a not used
10a--yel to 8b--yel
11a not used
12a not used
13a not used
integra 16 pin plug to civic plug
1b--grn/red to 2b--grn/red
2b--red/grn to 1b--red/grn
3b--grn/yel to 3a--grn/yel
4b--grn/blu to 4a--grn/blu
5b not used
6b--blk/yel to 10a--blk/yel
7b--red/blk to 11a--red/blk
8b--red to 12a--red
9b not used
10b--grn to 9b--grn
11b--org to 2a--yel/blu
12b not used
13b not used
14b--yel/wht to 1a--yel/wht
15b not used
16b--red/blu to 10b--blu/wht
Good luck. 98ctr
Parts needed:
-Gsr cluster from any Integra Gsr 96-00
-Gsr plugs for the cluster (from your local junk yard)
(the pins from the 5g civic will not work on the gsr plugs so you need the two plugs and about 4" of the wires so you can cut and solder to the civic harness)
-Solder and solder gun, I will encourage to solder and shink tube all the connections. Do it right the first time and you wont regret it later.
-Dremmel tool. You will need to cut the top of the gsr cluster to be able to fit back your civic panel back into place.
-Two zip ties or you can fabricate two small brackets to screw the gsr cluster in the civic mounting holes (gsr cluster is a bit longer so the zip ties works grate)
Steps:
1. Remove civic panel
2. Remove civic cluster
3. Cut and solder wires ONE AT A TIME so you don't get confused in all the mess
4. Trim top mounting bracket on the gsr cluster
5. Use tow zip ties to place gsr cluster in place of the civic cluster
6. Trim civic panel on the left and right side so it clears the gsr cluster
7. Put back the panel and enjoy your new DIY mod.
Here is the wiring:
integra 13 pin plug to civic plug
1a--blu to 8a--blu
2a--grn/org to 5b--grn/org
3a--yel/red to 6a--yel/red
4a not used
5a--wht/blu to 5a--wht/blu
6a not used
7a--yel/grn to 7b--yel/grn
8a--blk to 6b--blk
9a not used
10a--yel to 8b--yel
11a not used
12a not used
13a not used
integra 16 pin plug to civic plug
1b--grn/red to 2b--grn/red
2b--red/grn to 1b--red/grn
3b--grn/yel to 3a--grn/yel
4b--grn/blu to 4a--grn/blu
5b not used
6b--blk/yel to 10a--blk/yel
7b--red/blk to 11a--red/blk
8b--red to 12a--red
9b not used
10b--grn to 9b--grn
11b--org to 2a--yel/blu
12b not used
13b not used
14b--yel/wht to 1a--yel/wht
15b not used
16b--red/blu to 10b--blu/wht
Good luck. 98ctr