further info for diy obd0-obd1 harness
#1
further info for diy obd0-obd1 harness
was checking through the already posted thread ad need a little more clarification.. i read the pgmfi write up on it and am still a little confused.. any help is greatly appreciated
#2
Re: further info for diy obd0-obd1 harness
i have read the post, made many harnesses off it... no problems....
your post just states your confusion, and does nothing to help us help you... read your post again, then read the OBD0 to OBD1 post again... then if you still have questions, ask them...
your post just states your confusion, and does nothing to help us help you... read your post again, then read the OBD0 to OBD1 post again... then if you still have questions, ask them...
#4
Re: further info for diy obd0-obd1 harness
Originally Posted by turbohf
i have read the post, made many harnesses off it... no problems....
your post just states your confusion, and does nothing to help us help you... read your post again, then read the OBD0 to OBD1 post again... then if you still have questions, ask them...
your post just states your confusion, and does nothing to help us help you... read your post again, then read the OBD0 to OBD1 post again... then if you still have questions, ask them...
#5
Re: further info for diy obd0-obd1 harness
Originally Posted by 88dx
Their only $100 just be lazy and buy one
1.pm6 ecu female plugs...cost $0
2.92-95 civic ecu male plugs w 8" wire...cost $14.99
3.you own 0bd0-obd1 conversion harness....total $14.99
savings of $95 dollars
doing it yourself and gaining more management knowledge....$priceless
#6
Re: further info for diy obd0-obd1 harness
Originally Posted by sikcrx89
well i have the pm6 plugs lying around,and the obd1 plugs with some wire can be had cheap.. so add it up
1.pm6 ecu female plugs...cost $0
2.92-95 civic ecu male plugs w 8" wire...cost $14.99
3.you own 0bd0-obd1 conversion harness....total $14.99
savings of $95 dollars
doing it yourself and gaining more management knowledge....$priceless
1.pm6 ecu female plugs...cost $0
2.92-95 civic ecu male plugs w 8" wire...cost $14.99
3.you own 0bd0-obd1 conversion harness....total $14.99
savings of $95 dollars
doing it yourself and gaining more management knowledge....$priceless
knowing elementary mathematics...$priceless$
#7
Re: further info for diy obd0-obd1 harness
P05 = P06 = P07 = P09 = P28 = P30 = P61 = P72 = P75..... you get the idea.. they are all wired the same, its just that some have VTEC, VTEC pressure switch, knock sensors, different O2 sensors...etc just wire it up for the P28 like he shows. i highly doubt that you will use the knock sensor on a P30/P61/P72 if you even have one (i have one, and dont use the KS) so dont bother wiring that. and you can turn off the O2 senor, and heater so you dont need those extra 3 wires either.
that harness there will run a P30/P61 in a EF. with no external harness like the instructions have. the only thing it wont support is a 4 wire O2 sensor (i dont run O2 sensors)...
that harness there will run a P30/P61 in a EF. with no external harness like the instructions have. the only thing it wont support is a 4 wire O2 sensor (i dont run O2 sensors)...
#8
Re: further info for diy obd0-obd1 harness
Originally Posted by ryan89crx
$100 - $15 = $85
knowing elementary mathematics...$priceless$
knowing elementary mathematics...$priceless$
#9
Re: further info for diy obd0-obd1 harness
Originally Posted by turbohf
P05 = P06 = P07 = P09 = P28 = P30 = P61 = P72 = P75..... you get the idea.. they are all wired the same, its just that some have VTEC, VTEC pressure switch, knock sensors, different O2 sensors...etc just wire it up for the P28 like he shows. i highly doubt that you will use the knock sensor on a P30/P61/P72 if you even have one (i have one, and dont use the KS) so dont bother wiring that. and you can turn off the O2 senor, and heater so you dont need those extra 3 wires either.
that harness there will run a P30/P61 in a EF. with no external harness like the instructions have. the only thing it wont support is a 4 wire O2 sensor (i dont run O2 sensors)...
that harness there will run a P30/P61 in a EF. with no external harness like the instructions have. the only thing it wont support is a 4 wire O2 sensor (i dont run O2 sensors)...
Thread
Thread Starter
Forum
Replies
Last Post
90turboteg
Engine Management
5
07-10-2005 11:48 PM
90turboteg
Forced Induction
1
07-10-2005 12:26 AM
Sirex
Turbo Parts For Sale
1
05-22-2003 11:39 AM