flywheel bolt stuck, need suggestions
06-01-2006, 04:43 PM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
flywheel bolt stuck, need suggestions
well i figured out why im haveing problems with my ecu powering on... my ------- wireing harness somehow got caught up on the ------- axle!!! the ******** who had the car before me didnt think it was nessacary to put a little bolt back in to hold the lume in place 
so now after i pull the motor i need to fix the 10+ wires that got fucked over... i'll post a pic of the carnage when i come back from the garage next time
onto my question
im almost ready to pull the motor.. i dont wanna ---- with takeing the tranny out
can i undo the motor mounts and just tip it out without unbolting the tranny and be good to go?
so now after i pull the motor i need to fix the 10+ wires that got fucked over... i'll post a pic of the carnage when i come back from the garage next timeonto my question
im almost ready to pull the motor.. i dont wanna ---- with takeing the tranny out
can i undo the motor mounts and just tip it out without unbolting the tranny and be good to go?
06-01-2006, 05:10 PM
#3
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: wireing problems and motor pull question
dont want it all together, i have everything apart but the short block and tranny.. got the head and everything off, girdle, pistons will be out in a few.. i just wanna know if i can tip the block out of the tranny and be good to go
06-01-2006, 07:23 PM
#4
0.5 BAR
Join Date: Mar 2005
Posts: 184
Re: wireing problems and motor pull question
i think u need to pull the tranny away from the block, not the other way arround, so it will be faster if you take the whole thing out and get at the bolts when they are out, the tranny is only like 100 lbs or so its not a big deal
06-01-2006, 07:46 PM
#5
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: wireing problems and motor pull question
Originally Posted by twin911
i think u need to pull the tranny away from the block, not the other way arround, so it will be faster if you take the whole thing out and get at the bolts when they are out, the tranny is only like 100 lbs or so its not a big deal
im lifting this by hand thats why i only want to take the motor.. i got them apart, im just waiting for some help to lift it out of the bay now.. forgot you need to rotate them to seperate, that was a bitch.. cut my hand doin it
06-01-2006, 08:36 PM
#7
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: wireing problems and motor pull question
Originally Posted by ghettoturbo
ive never had a cherry picker...out the bottom with a jack as one unit is the method of choice for me
06-01-2006, 08:44 PM
#8
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: wireing problems and motor pull question
i just pulled it straight up the top away from the tranny..
anyone know how to get a flywheel bolt out that's stripped? it's one ------- bolt and its holding everything in place
i bought a bolt out set from sears, and all that good stuff, but cant get it to hold.. if i cant find a way to get it out i'll just have the machine shop take it out tomorrow
anyone know how to get a flywheel bolt out that's stripped?
it's one ------- bolt and its holding everything in placei bought a bolt out set from sears, and all that good stuff, but cant get it to hold.. if i cant find a way to get it out i'll just have the machine shop take it out tomorrow
06-02-2006, 07:57 PM
#10
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: flywheel bolt stuck, need suggestions
Originally Posted by slo_crx1
How the hell did you strip out a 12 point flywheel bolt? 
the machine shop is gonna weld on a nut to the bolt and get it out for me for free so its cool
i honestly have no ------- clue how i stripped it though.. i think the head was a little weak, he was tappin it with a hammer and chisel and it looked like it was pretty soft metal.. i dunno though
