Just did my swap, but Im only firing on one cylinder, SOHC ZC, new plugs new wires etc.. good compression all accross the board.. whats wrong? timing?

 

i think you forgot the fairy dust in your gas tank for good luck. .... Yup that must be it :1

 

Make sure the sparkplug wires are in the right order/location.

 

yeah mine was off like that when i did my swap. i was like 1 off all the way around on the dizzy. and the engine was like jumpin from only firing 1 cylinder.

 

Haha yeah, its like it wants to jump out of the car. Thanks for the input man that really helps out bro

 

Alright got it running muchh better, but still is a little hesitant in-between RPMS on take off. Could that be my cap/rotor? I gave them a good clean, but still our a little old. Let me know with some input fella's.

 

use a pritz bottle and spray the cap and wires with water. if it runs worse or if u can see aspark jumping around(check in the dark) then u need new cap and wires

 

Well I have brand new wires and plugs, I was just wondering if I should get a new cap and or rotor. What else could my hesitant problems be?