HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   F22A1 to H22 swap Info. (https://www.homemadeturbo.com/hybrid-tech-8/f22a1-h22-swap-info-50284/)

Speedy2k 11-17-2005 07:16 PM

F22A1 to H22 swap Info.
 
Hi guys, i am in the process of making a H22 swap in a 92 Accord, th e question i have is which years in the H22 engine is the best to buy and what i would need to put this engine in this car. thanx a lot!

90dx 11-18-2005 12:16 AM

Re: F22A1 to H22 swap Info.
 
I just did a H22 swap in a 93 Accord.We used a OBD1 JDM H22 and it was a super easy swap.Basically just drops right in just had to add 4-5 wires.I coverted it to manual tensioner and replaced the front crank seal,rear main,timing belt,water pump and new clutch.The P13 I believe it was JDM ecu plugs right in and the tranny I had to drill and tap a hole to relocate a stud for the tranny mount as the castings are the same but the studs are off by one in the H22 vs F22.The power steering was a bit of a issue as the prelude pump takes a diff style of fitting on the pressure line so you either have to cut and braze the Accord line onto the Prelude fitting or install the Accord pump and bracket.The Accord bracket only lines up on two out of three bolts and required trimming to clear the hood but it will just clear enough to not rub.I can probably answer most of any questions you have about the swap.It is one of the easiest swaps I have ever done.

Speedy2k 11-18-2005 03:14 PM

Re: F22A1 to H22 swap Info.
 
ok thanx a lot your information are really usefull, if i have other question i will ask them to your for sure i really appreciate! thanx!


All times are GMT -5. The time now is 09:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands