Re: engine wash problem, engine is missing
 

i swaped out map sensors and nothing changed, i'm going to swapy out spark plug wires tomorrow.

Re: engine wash problem, engine is missing
 

just do a resistance check on all the wire, if there all close to each other there fine.

Re: engine wash problem, engine is missing
 

yea, i just checked the resistance at on all the injectors and the are 25 ohm between the injector wire and battery. I pulled my uberdata chip and it runs the same. So thats very odd. its almost like my uberdata isnt running.. maybe i fried my ecu some how? or maybe its in limp mode and ignoring my tune. its running stupid rich right now smoking black

Nick

Re: engine wash problem, engine is missing
 

wait...did u shoot ur engine bay with a pressure washer?

Re: engine wash problem, engine is missing
 

sounds like limp mode.


i hit 23 psi boost cut yesterdfay and my car ran exactly as you descride it.

it would rev to 3500 and hit a limiter. reral rich ect./

sounds like your car is gay.

all i did was shuitthe car off, pull the ecu. let it sit for a hot second, and fire it up.

Re: engine wash problem, engine is missing
 

this happened to me once, take the plugs out and spray some compressed air down there to blow out any water, and then check anything else ignition related. it eventually went away for me

Re: engine wash problem, engine is missing
 

no i didnt pressure wash it.

it seems that my spark plug wires went bad or a combination of things.. Its on the road again, thanks for the help everyone!

Nick