engine i bult shutters at idle
05-06-2004, 07:52 PM
#1
0.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 20
engine i bult shutters at idle
i just re built a f22a block with a f22b1 head, i took off the idle air control valve because the one for the f22b intake man didnt match the pluge for the f22a wire harness, i also took off evry thing that has to do with ac and power stearing. for fuel mangement i am runing a vafc with 450 injecotrs. the problom is i jumps around at idle from 2000 to 2700, so i messed with the idle air control to get the idle to smoth out (some of the time) but when it dose smoth out its at 2500. and when the TB is totley closed its still sucking vac, any ideas
?
?
05-06-2004, 08:02 PM
#2
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re:engine i bult shutters at idle
Yeah...try posting in the right discussion room and maybe you'll get a more intelligent answer 
05-06-2004, 08:07 PM
#3
0.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 20
Re:engine i bult shutters at idle
witch would be were?
05-06-2004, 08:14 PM
#4
3.0 BAR
Join Date: Nov 2003
Posts: 5,838
Re:engine i bult shutters at idle
try the Tech Fourm
https://www.homemadeturbo.com/forum/index.php?board=3
check for vacuum leaks, Is there two IACV on those motors?
steve
https://www.homemadeturbo.com/forum/index.php?board=3
check for vacuum leaks, Is there two IACV on those motors?
steve
05-06-2004, 11:02 PM
#5
3.0 BAR
Join Date: May 2003
Posts: 3,365
Re:engine i bult shutters at idle
a moderator moved your post ya ***** wrinkle
you're still not getting any help from me
you're still not getting any help from me
Thread
Thread Starter
Forum
Replies
Last Post
Turblow
Engine Management
1
06-02-2006 04:09 PM
