engine code error (p1457) can anybody help!!!!!!!!!
The motor i got in my car which is a B16A runs a little rough.The only thing is that the purge control solenoid is missing,also the vacuum hose for the evap canister is not connected to the mani and i get a check light (code p1457) which is :evap system leak detected in canister area. the motor is eating alot of gas. do you guys know whats wrong
|
Re: engine code error
Originally Posted by 99ExY8BoOsTeD
The motor i got in my car which is a B16A runs a little rough.The only thing is that the purge control solenoid is missing,also the vacuum hose for the evap canister is not connected to the mani and i get a check light (code p1457) which is :evap system leak detected in canister area. the motor is eating alot of gas. do you guys know whats wrong
|
Re: engine code error
I have a 2000 Si with a B16A motor it use to be obd1 but the guy that had it before me change it to obd2 to pass state inspection. He left the paper from the shop where it say that it was converted back to obd2, it also was stated the they fixed the harness wires. The computer in my car says p2t. i have pics if you want to see. As far as the purge solenoid i guess he decided not to put it back on.
|
Re: engine code error
Today i tried runing the car hard and it felt like it was studering between 5800 to 7500. can anybody help
|
Re: engine code error
can anybody help
|
Re: engine code error (p1457) can anybody help!!!!!!!!!
Well the good news is you have the right computer. So i'm assuming the canister isnt' connected to the engine, but the canister is connected to the large line that goes back to the fuel tank correct? I'm wondering if your gas is essentially evaporating. Get the evap hooked up properly and see if the code goes away after a few trips, if not, then reset the computer and see if it clears. Then watch your gas mileage.
|
Re: engine code error (p1457) can anybody help!!!!!!!!!
Originally Posted by 99ExY8BoOsTeD
The motor i got in my car which is a B16A runs a little rough.The only thing is that the purge control solenoid is missing,also the vacuum hose for the evap canister is not connected to the mani and i get a check light (code p1457) which is :evap system leak detected in canister area. the motor is eating alot of gas. do you guys know whats wrong
|
Re: engine code error (p1457) can anybody help!!!!!!!!!
thats correct the canister isnt connected. my gas mileage is a little bit rough right know.
|
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands