EG Rear Sway Bars
What brand and size rear sway bars do you guys run on your honda 92-95 hatches. Any prefrences/experiencs you want to share are welcome.
I'm thinking about the cheap-o 19mm ST rear sway bar from Summit, or the Mfactory 19mm rear sway bar with the reinforcement plate or whatever it is. I'm aware of the problem with ripping out the rear cross member, so if I got the ST I'd fab something up with plate and weld that up to make it stiffer where it would mount to the car. |
Re: EG Rear Sway Bars
Comptech rear subframe brace with 22mm swaybar..... so no subframe rippage... ill look for pics... or i might take some more...
http://home.comcast.net/~turbohf/comptech1.JPG http://home.comcast.net/~turbohf/comptech2.JPG its on the car...just dont wanna look for the pics or go take them right now :P btw the black is custom ;) |
Re: EG Rear Sway Bars
I went to their website, but couldn't find anything to fit the EGs. Guess I'm retarded or something.
How much did that run you? I like the extra 3mm. |
Re: EG Rear Sway Bars
Originally Posted by onlyflash944
I went to their website, but couldn't find anything to fit the EGs. Guess I'm retarded or something.
How much did that run you? I like the extra 3mm. how much it run? nothin. i found it... :-* i got it on a car i got on trade and parted out... along with other ----... and honestly i probably wouldnt have bought it either...maybe i would? R*Crew is selling knockoffs now that look pretty damn close, and in more homo ass colors to satisfy the HT crowd. |
Re: EG Rear Sway Bars
I rock a stock teggy
seams to do the trick as for the ripping i used a 1 inch washer on the inside and the bracket on the out side to ------ out the force. dont forget the lock washer |
Re: EG Rear Sway Bars
Atticus, do you have stock EG LCAs on the rear, or did you swap them too? If you have the stock ones, what did you do for attaching the bar to the LCA?
|
Re: EG Rear Sway Bars
some civic lcas have them. obviously one's with stock rear swaybars.
you can also drill and tap into the regular lcas. |
Re: EG Rear Sway Bars
Thanks for the tip, that is what I'll probably end up doing.
|
Re: EG Rear Sway Bars
I have a 95 civic coupe with BLOX rear lower control arms and I used an integra rear sway. I got all the hardware off the integra and most egs have the treaded holes there already
|
Re: EG Rear Sway Bars
I'm going to have to check the CX to see if they have them. If not, maybe the rear LCAs I pulled off an 94 SI might. I also have a decnet set of drill bits and a great set of taps. I'd rather pay less and fab/problem solve some stuff myself.
|
All times are GMT -5. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands