EG (OBD1) Wiring pinouts at underhood plugs?
 

OK, let me explain what I've got going on here. Bought a strippped drag chassis (92 Civic hatch), all roll caged and everything with no motor or wiring in it at all. I do have a complete (whole car) wiring harness from a 94 LX.

What I want to do is to use the engine harness and the plugs that are under the hood (on the strut towers), cut the harness at the plugs on the car side, and then splice everthing from the underhood plugs directly to the computer. Essentially eliminating everthing that I don't need. But, obviously, I can't do this unless I have a diagram for the pin locations/colors AT THE PLUGS under the hood on the car side of the harness.

I have searched all over the place and I can't seen to find anyone that has this, or even just a harness setup like this that I can buy. Yes, I do have a copy of the factory service manual and the page with this on it is so blurry it's useless, not to mention mega-confusing. I not afraid to build this whole thing, I JUST NEED THE INFO!! :S

One more thing...No, the wire colors at the ECU and the colors at the plugs are not the same (that would be WAAAY to easy, wouldn't it)

OOPS! I just noticed that this really does belong in the ENGINE MANAGEMENT section...sorry!

Re: EG (OBD1) Wiring pinouts at underhood plugs?
 

This is more of a tech thread. Even though this deals with the ecu, it doesn't have to do with tuning.