EG axles vs EF axles
 

EG axles same as DX/SI EF axles on D-series? I should know this one, but I need to make sure..

thanks

Re:EG axles vs EF axles
 

Use the search button noob. hahahahaha


I think they would be. :-\ Does that count for anything. ???

Re:EG axles vs EF axles
 

Man, I'm so lazy I could go out and check in the garage. But my computer chair feels good ;)

Re:EG axles vs EF axles
 

If memory serves me they are different. A buddy of mine tried it and something was different cant remember excatly the reason though.

Re:EG axles vs EF axles
 

Jeff I think there different cause I tried using an a brand new EF sohc axle I had laying around in my y8 tranny and couldn't get that ---- to work. Don't remember why it would work but maybe I'm just retarded. Hmmm that could be the reason though :P For some reason I though I think it was the male part of the axle that goes into the knuckle was shorter on the EF one? Like I said I could just be retarded too!

Re:EG axles vs EF axles
 

But the EG and EK axles are interchangable, right? ???

Re:EG axles vs EF axles
 

I would think that they are the same because the placement of the tranny is the same in relation to the hubs. I say just do it and see twhat happens. ;)

Re:EG axles vs EF axles
 

the eg rear lca's are 1/16" longer i believe. And i would assume the front tires would follow the same width as the rear so the front axles would need to be longer to seat into the hubs... ?

Re:EG axles vs EF axles
 

I think the axle itself is the same lenght, but the thingy at the end of the axle is different...

Re:EG axles vs EF axles
 

The axles are different. However I am currently using an axle from an eg on my ef. The eg axles have a longer on the part that goes through the hub. I only am using it for a temp fix. It works if need be but I would recomend getting the right one.