turbo4life

hi i have 89 ---- crx and want to put z6 in there and still use my hydro tranny has annyone tried sticking the hydro clutch pedal and clutch master cylinder in ef?

and the trans mounts should be exactly the same (so my hydro d trans will bolt to ef stock mounts)

turbo4life

http://www.hasport.com/images/cma-ani.gif

im not talking about this

dummee

I've converted an auto to a manuel using a stock assembly with a 1/4 inch plate at clutch assembly and drilled a hole for clutch master cylender where clutch pedal met the cylender then from there ran a steel braided line to slave cylender. It's still working to this day. I'd get you pics but I'd rather punch the guy in the **** sucker than talk to him. Sorry if spelling is off. Not my best subject in school. PM me if questions.

turbo4life

thanks pm'd

sloTeg

i just used the cable pedal assembly and added a 1/4inch thick plate with the master cylinder inside the car. held up to my LSD dragger clutch.

https://www.homemadeturbo.com/forum/...?topic=94103.0

turbo4life

sweet thanks for all the help