eagle d16 rods in d15 ?
 

i have eagle rods for any d16. I have a jdm d15b vtec and ive heard all the parts are interchangeable but unsure if the rods are the same. If u have any info it would be greatly appreciated.

Re:eagle d16 rods in d15 ?
 

The best thing you could do is sell them to me so I can put them in mine ;D.

Re:eagle d16 rods in d15 ?
 

the rods are to long alot of thangs are interchangeable but not every thang the rods pistons and crank are different

(all statements are to the best of my knowledge)

Re:eagle d16 rods in d15 ?
 

well the pistons are the same but crank and rods im pretty sure are different, why cant they make eagle rods for the d15 !!

Re:eagle d16 rods in d15 ?
 

See the rod's to me ;D ;D

Re:eagle d16 rods in d15 ?
 

Little G34....wanner get rid of those d16 rods? ;D
i`d take them

Re:eagle d16 rods in d15 ?
 

why not just get a 1.6 crank....?

Re:eagle d16 rods in d15 ?
 

ill send you one for the cost of shipping, my garage is a d series grave yard and i just want to clean it out..

Re:eagle d16 rods in d15 ?
 

woul D16 rod's work in a D15 if you put in a D16 crank???

Re:eagle d16 rods in d15 ?
 

i dont see why not,

Re:eagle d16 rods in d15 ?
 

hmmm ok
Is'tn the block shorter?

Re:eagle d16 rods in d15 ?
 

that was my orig thought sem..

Re:eagle d16 rods in d15 ?
 

hmmm I want to try it out.
I got a D15 in my shed and a D16 crank and rod's
But i don't want it not to be able to work though.
Does the D16 crank have a shorter stroke? if so it would be able to work

Re:eagle d16 rods in d15 ?
 

ATTENTION! I dont the crank is the problem, its the block, I came across a similar problem I bought a je piston/eagle rods combo for a b18c5 hoping it would have bveen a step up for my b16, the rods where too long, so I ask around about changing the crank, the answer was no way. b18 block is higher than b16. so its the same relation with d15 and d16

Re:eagle d16 rods in d15 ?
 

not necessarily.

The D15 has 134mm rods, 84.5 mm stroke, and a 75mm bore.
The D16 has 137.?mm rods, 90.0mm strok and a 75mm bore. These are pretty close, there are a few 1/1000s here and there.

So if the D16 has roughly 6mm longer stroke, that would equal 3mm at the top and 3mm at the bottom, And a 3mm longer rod- that would equal the same lower position as a d15 and a 6mm higher than D15 position at the top of the stroke. Right? So yeah, maybe the blocks are different. I've got a few of each at home, I'll check it out.

Re:eagle d16 rods in d15 ?
 

yeah I thought so no fitty

Re:eagle d16 rods in d15 ?
 

D16 cranks have way larger journals than D15's so swapping in a crank is out of the question.

I am pretty sure both blocks have the same deck height. I have always asked myself this question too, would putting D16 rods in a d15 work? yes, they are longer.. but will there be interference? I'm sure someone has tried this..

Jeff

Re:eagle d16 rods in d15 ?
 

hmmm if you could at least get a 3mm blockplate it might work ;)

Re:eagle d16 rods in d15 ?
 

nope not going to work without customization

Re:eagle d16 rods in d15 ?
 

d15 sucks ass :'(

Re:eagle d16 rods in d15 ?
 

B16A B18A/B and b18C1 have the same deck hight

B16B and B18C5 have the same deck hight, but are different from the previously stated.



This is what i was told on honda tech.. and many people had the same answers.