HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   EACV (Eletronic Air Control Valve - code 14) (https://www.homemadeturbo.com/hybrid-tech-8/eacv-eletronic-air-control-valve-code-14-a-2696/)

flatline911 03-10-2003 11:22 AM
EACV (Eletronic Air Control Valve - code 14)
 
Can someone please tell me how i do this?


EACV (Eletronic Air Control Valve - code 14) can be "tricked" by putting a 10W 10ohm resistor (radio shack #271-0132) instead of running wires to your EACV, then adjust your idle with your idle screw on thr throttle body.

Save some money..




Thanks

TurboEF9 03-10-2003 12:04 PM
Re:EACV (Eletronic Air Control Valve - code 14)
 
Ya.. Just cut the harness connector off, and complete the circuit with the resistor.. it's cake.

If you want to be s00p3r l33t, do it at the ECU.

flatline911 03-10-2003 02:48 PM
Re:EACV (Eletronic Air Control Valve - code 14)
 
where is it located the harness connector ???

Thanks

HMT-Admin 03-15-2003 01:05 AM
Re:EACV (Eletronic Air Control Valve - code 14)
 
Which resistor do you use?

TurboEF9 03-15-2003 02:30 PM
Re:EACV (Eletronic Air Control Valve - code 14)
 
10w 10ohm..

I don't remember the pinout, HASport has it..

leed 03-15-2003 10:00 PM
Re:EACV (Eletronic Air Control Valve - code 14)
 
Good info. :)

<<adding to list of ghetto ---- that works>>

HMT-Admin 03-15-2003 10:57 PM
Re:EACV (Eletronic Air Control Valve - code 14)
 
So then, all you do is just wire that resistor on the signal wire thats it? or what?


All times are GMT -5. The time now is 08:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands