Im trying to get the dust covers behind the disc off on my ef and i cant get the damn philips head screws out of the disc to get it off and get to the dust cover anybody got any ideas on how to do this tried near everything allready.


Phil

 

I killed a socket by putting a phillips bit into the socket and using a friend to push onto the screw and the rachet to get the torque to get the screw off.

 

If you have access to a dremel tool, I would use That. Other than that those bolts are usually pretty stubbord due to the excessive heat and cooling effects, try heating that part of the rotor up with a propane torch, then try loosening it, that usually works for me! Good luck! And don't get it too hot!