DPFI to MPFI, engine harness problem?
 

well.today i was trying to convert to MPFI a DPFI car from a guy i know.. got all , even engine harness but there is a problem..

first off i have to say both car are EGs, one is american EG and the nother is made in japan. one comes with P04 and other with P05 ecu..well i was cheking engine harness , but found a trouble.. i need an connector for to plug this: (not sure that connector is it , but i was thinking could be for injectors...) it has 4 wires, brown, read, yellow and sky blue..

im not sure what engine harness have to use..was trying to take ouy all wiring but it's very difficult besides it's broken some wires...

http://img508.imageshack.us/img508/8148/21082007rd5.jpg

cuold be they have differents engine harness because are made one in USA and other in Japan?

Engines are : USA D15B8 MPFI and Japan D15AB2 DPFI.

:X

Re: DPFI to MPFI, engine harness problem?
 

what kind of car do you have? dpfi came on 88-91 civic/ crx ds or std. and eg should have multiport

Re: DPFI to MPFI, engine harness problem?
 

retard read his post its a jdm civic

Re: DPFI to MPFI, engine harness problem?
 

my freind had the same prob use your oem harness just run the injector harnesses strait to the ecu W/ resistors or a box and should fire right up.

Re: DPFI to MPFI, engine harness problem?
 

that's i was thinking, what i need is diagram pin for both ecus. P04 and P05 :3 , besides there is a connector that doesnt plugs with one of engine harness ( i think i need to cut and splice ? colour wires are differents i think)..

Re: DPFI to MPFI, engine harness problem?
 

use the 1 with the plug that matches

Re: DPFI to MPFI, engine harness problem?
 

that is such good advice