Ok search doesnt work soo im just wanting to make sure i got this right.
I got a 88 crx dx (i trades a cd player for it) i am doing a z6 head swap.I do belive i got everything for it,Complete z6 head with si intake mani,pm6 ecu,tb.Do i need to get a si/hf harness to do this or no.My buddy said i cant but i just want to make sure.

 

Nope, you would need to re-wire the whole car to use an Hf or Si harness. And why are you useing the PM6 ECU with a Z6 head?

 

money.I got a vafc.so imm going to use that untill i can get it chipped.So i have to run the dx harness??

 

Yep, it's easier to run a few wires than replace all the wireing in your car. This should help:

 

So i can tear apart my 88 teg harness an use the wire and clips from that to wire up mine right??

 

Yep, you need the injector clips and wire, the resistor box if you use high impedence injectors, and possibly a few ECU pins.

 

sweet than i got it all.Except i dont have a tb.Will a b18a tb fit on there??I also got a d16y7 on too?

 

the B18 TB will fit the Z6 intake if that's what your useing, but not the A6 intake. If all else fails you can use a B7 intake and the B18 TB with some porting. It's not the best option but it works. I have both the A6 TB and the B7 intake if you need one.

 

so a y7 tb wont fit on a a6 mani??

 

The only other TB that I know of that fits the A6 intake is the DOHC ZC/D16A1.