dizzy d15b1 obd1 swap
 

k well i decided to throw my turbo on my stock d15b1 until i finish up rebuilding my z6 for it..
so i put the z6 dizzy on my d15b1 and only 1 hole lines up and the bolt doesnt go thru.. so should i drill out the top hole on the dizzy wider and stick a bolt thru there? im switching to obd1 with stock d15b1 and going turbo on 8psi then 25psi when my engine is done so i can blow it LOL.

Re: dizzy d15b1 obd1 swap
 

buy a obd1 non-vtec dizzy

Re: dizzy d15b1 obd1 swap
 

drill it out, insert bolt, done.

Re: dizzy d15b1 obd1 swap
 

JB weld

Re: dizzy d15b1 obd1 swap
 

You can use one bolt, may leak alittle oil but nothing horrible.

I have had to do this in the past.

Re: dizzy d15b1 obd1 swap
 

im broke and plus i dont feel like rewiring that dizzy cuz its a ------- nightmare and everything is wired correctly so im swapping over the harness from my other civic so i know the wiring is 100% correct