I just put a B16A3 into my 92 Hatch DX this weekend but I have one problem. The plugs for the distributor is different. My question is, instead of hunting down another distributor can I use the one from my SOHC motor.

 

A3? that a 99ish Si?
What color is the distributor plug?

No direct exp here, but the Dseries one is a def. no go.

 

i dont think you can. something about the sensors inside the dizzy. what wont fit, the plugs?

a b16a3 is out of a del sol I believe. Go to a dealer and bring your dizzy and check what the del sol vtec dizzy looks like compared to yours. if they look different swap the plugs maybe?

 

Dizzy????????? I just thought of this . why don't i just splice the B16 plug wires to my d series plug. The color of the wires are different but the wires are the same amount 7or 8 wires i think. has anyone ever done this if so could u help me out :o :o :o

 

dizzy = distributor

 

make an adapter from the wire extra wire harness's instead of cuttin the plugs up on the dizzy or the harness in ur car...

 

OBD2 connector is diffrent from the OBD 1. What i have done is either cut the engine harness and solder up the plugs for the OBD 2 dizzy or make a nice little harness (i can make you one but you will have to supply the plugs).

 

just got to the junkyard and cut the plugs off u need . i had extra plugs so i made my own lil adapter..

 

or just open it up and change the internals w/ d series plugs. go read up on honda-tech, its been done before and works.

 

ive tried that its a bit difficult.. be better off with the adapter. what yr are u tryin to put this delsol dizzy on? cause it wont work off a 92-95 del slow on a obd0... doesnt matter how u hook the internals up ive tried.