dang ls wont start

Reply Subscribe

Thread Tools

Search this Thread

06-24-2004, 10:00 PM

cd1fidy

0.5 BAR

Thread Starter

Join Date: Apr 2003

Posts: 80

dang ls wont start

88 crx si, with resistor pack running dsm 450 injectors with resitor pack, pr4 wiring harness, blownhatch's obd0-obd1 conversion harness, 94 ls ecu with uberdata chipped for boost.

ok so now whats the deal I have spark, compression and gas in the fuel rail why wont this pos start. I also know the dizzy is good since I installed it on another car and it ran fine, same with the ecu. Im down to the last straw .

goin to try a timing light just to verify time is on but its kinda hard to screw it up so bad that it wont start.

06-24-2004, 10:44 PM

Project CRXtacy

1.5 BAR

Join Date: Apr 2004

Posts: 728

Re:dang ls wont start

are you sure that the ground wire on the engine harness is grounded ? =D ive done this a couple times.

06-25-2004, 09:00 AM

88crxSi

3.0 BAR

Join Date: Feb 2003

Posts: 9,089

Re:dang ls wont start

you should have used the 88 CRX Si harness and modified it to work with that engine.

what year engine? 94?

06-26-2004, 10:15 AM

cd1fidy

0.5 BAR

Thread Starter

Join Date: Apr 2003

Posts: 80

Re:dang ls wont start

yea its a 94.

06-28-2004, 07:20 PM

Souutherncivic

0.5 BAR

Join Date: May 2004

Posts: 154

Re:dang ls wont start

when i put an ls in my 94 sedan, it ran, but very rich. after i put the d16 injectors on the b18 it ran a hell of a lot better. you might also try a d16 wire harness. they are almost identical

06-28-2004, 10:39 PM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:dang ls wont start

Use the stock si harness and add the adapter harness. This was just dicussed and all style crx's run different harness so this maybe your problem. Swap in the 88 harness