da9 ls v-tec turbo
 

can i make my da9 a ls v-tec turbo somebody told me that putting a v-tec head on my b18 A1 and a turbo would be to much compression and blow my bottom end is this true can i make my b18A1 a ls v-tec turbo

You can put a b-series vtec head on it and it will be fine for turbo. The problem comes with how you do. There are some precautions that you need to take care of before you decide to just slap on a head and call it a day. You gotta supply oil to the vtec head, buy the right dowel pins, use ARP GSR head studs, etc...

If I were you, I'd say screw it and turbo your LS straight up. If it breaks, well then do an LS/VTEC or just build up the LS block.

so ur saying forget the v-tec head and just go ls turbo

its pretty much a waste of time really. just turbo what you have. if you blow it up and want to build something real serious then put the head on it later. your turbo kit will still bolt up to the new head.

+1 headswap would be minimal gain for the effort.

ok and if it blows im thinking of going a k24 or the nsx motor or a gsr k20

ls turbo for the win... if you blow it drop in a built b18

Blow It And Drop In A D FAKLAD FOR LIFE!!

Most of you guys are also forgetting that if he slaps a vtec head on, he has to first prep it. In which case, there still might not be sufficient enough oil. So it's best that he also switches over to a vtec oil pump, therefore making an ls/b20 vtec setup sufficient. And if he really wants to top everything off to make sure there's enough oil, he could slap on an OEM oil filter :P.

But after spending all that money, he still would have just the same amount of fun with just an ls-t setup.

but i would like to do ls v-tec-t