DA rear disk conversion on eg 4 door
 

I have a set of 92 integra rear disk brakes and I was wondering what hand brake cables to use.
Do I use the DA cables or the DC ones?
And do the damn lines need modifying?
I need this asap, I'm losing brake fluid on a daily basis.

Re: DA rear disk conversion on eg 4 door
 

if you have the rear arms off of a 92 integra, you should have hopfully taken the cables off, and not cut them.. if you cut them then you'll need to replace them and use the cables for the integra. as for the brake lines i beleive you need to disconnect the lines from the chasis of the integra and leave them connected to the caliper. install in reverse order, hope that makes sense. i had a friend who just used some parts from my 91 integra for his 92 eg hatch, thats how i know. also, obviously you'll need an alignment badly because the camber and toe will be way fucked up, im sure you'll see when you get them on there, good luck man.

Re: DA rear disk conversion on eg 4 door
 

DA/DC/EG (did some come w/ rear disks?)/EM chassic ebrake cables should all work.

brake lines (soft) is the same as above.