D16z6 Crankshaft
I was wondering if i can use a non vtec crankshaft on a vtec engine?
|
Re: D16z6 Crankshaft
can i use other crankshaft from B18, B16, D16? I wasnt sure and wanted to find out. Crankshaft cost $100 used at ebay? :o ---- I need to hit the junkyard
|
Re: D16z6 Crankshaft
you can use d's with d's and b's with b's vtec or non its cool
|
Re: D16z6 Crankshaft
Most of the time yes, but D15's and D16 cranks dont mix.
B18a/b and B20b/z cranks are the same B18c1/c5 GSR and B16a cranks can be swapped into non-vtec blocks but you will need to use the correct rods for it to work right. |
Re: D16z6 Crankshaft
I would agree, don't mix D15 and D16 cranks they are a little different
|
Re: D16z6 Crankshaft
whats wrong with your crank? usually you can have them cleaned up if you spun a bearing or something like that. they make .25 and .50 undersized bearings to compensate for clean-up on a crank. the machine shop will most likely charge u less than 100 for cleanup....just a thought.
|
All times are GMT -5. The time now is 06:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands