d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
I was just thinking, these rods are SLIGHTLY longer so they could bring the piston closer to the deck, as well as give it a SLIGHTLY better r/s ratio
anyone done this? |
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
I'm thinking the GSR rods are too narrow on the big end?
I dunno.......... |
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
i'd like to know that too
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
the gs-R rods are weaker than the LS rods so that alone is enough to say forget it, gs-r motors are known to snap rods with boost, isn't that enough said?
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
will ls rods f it on a d seres?
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
Originally Posted by boosted_b16
the gs-R rods are weaker than the LS rods so that alone is enough to say forget it, gs-r motors are known to snap rods with boost, isn't that enough said?
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
Originally Posted by Walter
really? ive seen a lot of grs cams without problems making around 250-290 whp :1 ...
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
What about aftermarket? I'm looking for the longest rods I can stuff in there, ...
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
GSR rods are much stronger than LS rods. GSR rods have much more material around the journal. Also GSR rods are too thin on the big end. They are about 35 thou thinner. Also the GSR rod is only 1mm longer, which still places the piston below the deck. |
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
Originally Posted by MADMAX
GSR rods are much stronger than LS rods.Also GSR rods are too thin on the big end.
|
Re: d16y8 / d16z6 using vitaras + gsr rods instead of vitaras + ls rods?
Originally Posted by boosted_b16
dee dee dee :1
Compare a GSR rod with an LS one. You'll see the difference. |
SO CAN WE USE GSR RODS IN D16Z6 crank ?
Please people its very urgent .. so ls crank is the same like GSR crank ?! |
All times are GMT -5. The time now is 01:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands