D16a6 problems
engine revs slow to about 3k then its fine, i have check everything, vaccum, spark plugs and i think the timing is ok
|
Re: D16a6 problems
tune up, check timing
|
Re: D16a6 problems
just put new spark plugs in it and it didnt help, so i have no idea what the problem is im goin to have to check the timing again maybe
|
Re: D16a6 problems
you probably got a small dick
|
Re: D16a6 problems
That's how mine always felt ;)
|
Re: D16a6 problems
post a video
|
Re: D16a6 problems
is idle good?
|
Re: D16a6 problems
Originally Posted by SpoolinZc
and i think the timing is ok :1
Cam or ignition?... Pull your timing belt cover to see if you jumped a tooth. Before you do that get one of these: http://www.siphonsonline.com/images/dynamicduo.jpg and see if that wakes up your lowend |
Re: D16a6 problems
Originally Posted by SpoolinZc
engine revs slow to about 3k then its fine
isnt that the description of every honda motor on earth |
Re: D16a6 problems
Originally Posted by bitchasscracker
isnt that the description of every honda motor on earth |
Re: D16a6 problems
this a stock set up or you do anything to it or ecu before this happened? any other symptoms or sounds (surging, bucking, uneven idle, or misfiring)? double check your timing and plug wires themselves?
|
Re: D16a6 problems
Retarded timing at the distributor perhaps? (or the user ;D) That's usually a sign of it, or cam's off a tooth.
|
Re: D16a6 problems
werd, timing belt slipped a tooth or three.
|
All times are GMT -5. The time now is 03:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands