D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

Hello. I have now 10,78 compression. I want to install a T3 with IC. Is it possible without pre-detonations?

Thanks.

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

yes it's possible. It's all about tuning and not being stupid. And if you have to ask, then you're probably not ready yet; keep readin

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

a6 with CRX pistons??

that would be stock....

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

LOL thats what I thought when I saw the title too!

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

2 months ago was cleaned cyl. head, were changed the piston rings and I bought PM7 pistons(PM6 -3,4 ccm, PM7 dome 7,2 ccm) from my friend. (1/4 miles in 1600ccm category 3rd place)

So, I calculated the comp. ratio with D-series comp. calculator and the soft showed me, that it's possible to use PM7 pistons. The engine is really powerful, but not enough. :-)

I searched and studied a lot and I saw, that it's maybe possible to use a bolt-on turbo kit. There are a "hundreds" kits on e-bay, but I don't how to order to Europe.....

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

you know how to order to europe and you dont want to.
build your own kit.

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

pm7 is integra

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

No, pg7 is usdm integra...he has a EDM moron. Pm7 is found in some crx-si's in Europe...dohc zc. Hell, his name shoulda given the ED7 away ::)

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

Originally the engine is D16Z2 with catalysator. D16A6 is the same engine without catalysator. Z2 and A6 are with PM6 pistons (CR 9,1:1). PM7 pistons are in DOHC ZC engines. P29 pistons are in 94 integras. These are polished(P29), but looks like as same as the PM7.


And about ordering a kit from e-bay..... I don't know how. Here in Slovak republic I cann't use PayPal method of paying. If I transfer the money (approx. 800-900 dollars for the kit+ 180-250 dollars shipping + VAT 19%) how can be I sure, that the kit will arrive to me? I don't know, who is that seller on e-bay,..... and about feedbacks on e-bay ........ ?????????? These positive feedbacks could be added by administrator, so I'm afraid of it. I cann't belive in it, that's so easy to order, pay and unpack the ordered pack.....


Thanks.

Yours sincerely:

Leslie DUDAS

Re: D16A6 with CRX pistons and 100 octane - T3 turbo?????
 

BS, I've torn apart over 10 blocks over the years for my 89 integra DOHC D16A1 and all had PM7 pistons, its not just EDM/JDM. They are the same thing as P29s. P29s are not from 94 integras. The browntop DOHC D16 is PG6B 9.3:1 compression. Check the part numbers. Hey moron, PG7 is the 88-89 integra ecu, not a piston. Zeniceguycrx know what he is saying :6