d15b in 91 crx dx
 

i was wondering what all i have to do in order to get it running ... the motor is in but i don't know what harness to use ... i have the obd1 ecu conversion but i need to know what else i need to do ... distributor wiring? harness? im really lost bc i know i have to convert it over to mpfi but i just don't know where to get the info. it sucks bc it is a dx and it has been hard finding info on a dx!

Re: d15b in 91 crx dx
 

First off, has the dx been swapped over to mpfi? If not, do it cause you need it to run the motor. You're going to need a dizzy from an obd1 ex or si motor...d16z6 and the p28 ecu to match. When you get the dizzy, try to get the male end of the plug as well to splice the wiring together, or (this is the easiest way) order an obd0-obd1 distributor harness adapter. You're also gonna have to use a 4-wire o2 sensor instead of the stock 1-wire. If you need the dizzy wire splicing, let me know...i have the correct wiring write up from LoCash racing.