D-series Questions
Okay first off i have a 90-91 ZC tranny and a 90-91 civic flywheel but i have a 92-95 clutch set.. will that work or do i need something different?
Also i can't find any ARP headstuds for the D16a6, what head bolts will work if they don't make them for the d16a6.. the z6 ones are shorter i believe..? |
Re:D-series Question
the 92 clutch is hydro, the 91 clutch is cable, I don't think they'll work, but you should wait for someone smarter than me to reply.
|
Re:D-series Question
well the disc mates perfectly with the flywheel and it slides on the tranny just like the 90-91 civic clutch disc, but i wanna know for sure
|
Re:D-series Questions
check part numbers from different manufacturers, particularly the one you got yours from, if they are the same then it looks like you found a winner. I'm not talking about "kit" part numbers because the 92 will include ---- you don't need, I think, so just compare disc part numbers.
|
Re:D-series Questions
that won't help.. the civic and crx of 90-91 are even different part #'s and they are even the same exact clutch, i need to know for sure if this will work!!! PLZ!
|
Re:D-series Questions
It works...I think the release bearing is a bit different.
I'm currently using a '91 CRX clutch kit on a 92 EG hatch. They are all the same only the release bearing I had to take of the part that holds the release bearing to the fork of the hydro tranny from the old release bearing and then replace it with the one on the new CRX release bearing. The CRX one has a different thing to attach the release bearing. That was about it...it was easy. So what you have should work, just look at the release bearing that's the only thing you need to change or modify |
Re:D-series Questions
Just call James man, he or Tom will know... I'm pretty sure any 90+ civic clutch should work fine though...
|
Re:D-series Questions
I am using a 95 civic clutch disk with my 91 crx. Just as long as everything slides on right you should be fine.
|
Re:D-series Questions
yeah it works. did it to a friends zc swap. eg flywheel six puck and pressure plate with 90-91 tranny.88-89 doesnt work.
|
Re:D-series Questions
Originally Posted by BoosTedZSix
yeah it works. did it to a friends zc swap. eg flywheel six puck and pressure plate with 90-91 tranny.88-89 doesnt work.
|
All times are GMT -5. The time now is 09:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands