D-series motors
i just got a well taken care of D15 block will a 1.6L ex head bolt right up??
|
Re:D-series motors
What d15 block do you have?
if its the d15b6 or b8 with 8 valve reliefs in the pistons you may have a problem. But if the d15 is a b2 or b7 you can put a 16v 1.6 head on no problem.. The b2 and b7 already come with 1.6 heads, only differnece is the cam shaft. Jeff |
Re:D-series motors
its the b7. so i should have no prob? and should i just run an EX ECU??
|
Re:D-series motors
What ex head are we talking ? SOHC Vtec head?
|
Re:D-series motors
ya
|
Re:D-series motors
im kinda hangin can anyone help me??
Thanx |
Re:D-series motors
you can run the SOHC VETC ECU for the EX or run a CRX Si ecu and run VTEC off a rpm actiavated switch.
I strongly recommend the SOHC VTEC ECU |
Re:D-series motors
if your a little slow when it comes to wires like myself you could get an 89 teg ecu and a vtec controler. you can rev the teg ecu to 7500 rpm instead of 7000 like an si ecu. just a thought.
|
Re:D-series motors
Originally Posted by yellow90si
if your a little slow when it comes to wires like myself you could get an 89 teg ecu and a vtec controler. you can rev the teg ecu to 7500 rpm instead of 7000 like an si ecu. just a thought.
|
Re:D-series motors
i thought that the ex ecu wont fit cause is obd1..
|
All times are GMT -5. The time now is 02:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands