CRX Electrical problem? PIC'S
02-09-2008, 08:45 PM
#1
1.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 526
CRX Electrical problem? PIC'S
I have a new problem with my CRX, i just change the old LS engine for a new one and move some wires, nothing special.
When i rev the new engine to 2500rpm act like a valve problem, and when i drove it and reach like 2500rpm the car acts like if i have the 2 step limit and then shut downs, but i do a compression test and reads 150 in all 4 cilinders.
Could be a wiring probem from my Homemade Jumper Harness?
Or could be the fuel pump?
When i rev the new engine to 2500rpm act like a valve problem, and when i drove it and reach like 2500rpm the car acts like if i have the 2 step limit and then shut downs, but i do a compression test and reads 150 in all 4 cilinders.
Could be a wiring probem from my Homemade Jumper Harness?
Or could be the fuel pump?
02-10-2008, 12:00 AM
#3
1.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 526
Re: CRX Electrical problem? maybe
Originally Posted by crxvtec91
Damn that look like a pain 
BTW what wires did you move?
BTW what wires did you move?
02-10-2008, 01:56 PM
#5
1.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 526
Re: CRX Electrical problem? maybe
Originally Posted by crxvtec91
Tienes codigos 
And another weird problem i have is with the dizzy. To reach the smoother idle, the distributor needs to be moved from his original position, here i attach a picture to show this.
02-10-2008, 06:30 PM
#7
1.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 526
Re: CRX Electrical problem? maybe
Originally Posted by crxvtec91
Your pic made me lol. Check cam timing, for the dizzy. BTW to check for codes just jump the blue clip around the ecu with a paper clip. If you did it right your check engine light will come on.
Actually, if anyone can help me to find that thread of how can i check the CEL codes for a EF with OBD1, could be the greatest help to find my problem.
02-11-2008, 01:11 AM
#9
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: CRX Electrical problem? maybe
Originally Posted by hard2obtain
Timming is Ok, remember i use a OBD0-OBD1 jumper harness.
Actually, if anyone can help me to find that thread of how can i check the CEL codes for a EF with OBD1, could be the greatest help to find my problem.
Actually, if anyone can help me to find that thread of how can i check the CEL codes for a EF with OBD1, could be the greatest help to find my problem.
Originally Posted by crxvtec91
Your pic made me lol. Check cam timing, for the dizzy. BTW to check for codes just jump the blue clip around the ecu with a paper clip. If you did it right your check engine light will come on.
