crx electrical help needed..im friggin baffled....
 

Ok, heres the rundown..89 crx si swapped with a b16a with turbo...been like that for awhile..tore it down, rebuilt it...put it back together and slapped it in the car...

got a chipped p28 from xenocron, obd0-obd1 conversion harness, dizzy, etc...got everything hooked up-easy since i had to run all the wires to run the b16 with the pr3 before...

The gauge lights come on and dont go off(check engine, oil, etc..), fuel pump doesnt come on-I dont even hear the main relay click...ive gone over the wires 3 or 4 times double checking..all looks fine and dandy..still does the same thing if i try the pr3 without the conversion harness, so i dont think its anything with the obd1 conversion...

Anyone have any ideas? Im ready to throw 28 pounds on this built b16 and melt my tires.... :7

Re: crx electrical help needed..im friggin baffled....
 

grounds maybe? sounds like they are not secure... i guess since you said the main relay wont click it wont crank either?

Re: crx electrical help needed..im friggin baffled....
 

Main relay doesn't control cranking.

Are you saying that the gauge lights you mentioned don't turn off a few seconds after putting the key in the on position?

Re: crx electrical help needed..im friggin baffled....
 

right, they stay on..and no it doesnt start, but it does crank.

Re: crx electrical help needed..im friggin baffled....
 

Do you mean they stay on? And it's entirely possible for your engine to crank with no fuel pressure, it just won't start.

Re: crx electrical help needed..im friggin baffled....
 

Jago, if you sign on live anytime tonight for Halo or whatnot..I'll be more than happy to explain..maybe you can gimme some ideas of what it could be...and shoot people at the same time.. >:D

Re: crx electrical help needed..im friggin baffled....
 

bad map sensor wiring on my part...fixed..now i gotta make a good basemap so it'll start and not flood out.. :'(

Re: crx electrical help needed..im friggin baffled....
 

new main relay?

Re: crx electrical help needed..im friggin baffled....
 

nah..i got 2 wires backwards on the 3 bar map wiring... ;D