Configuring approx. compression ratio with added boost?
#1
Configuring approx. compression ratio with added boost?
say you have a 12:1 motor and you want to add 7psi from a JRSC. Being that the JRSC would effectively raise the compression even more, is there are way to determine the approximate compression without an elaborate formula?
Do you think this would be possible on pump gas without the engine detonating its *** off? I've got pretty good control of the ignitionright now with Ectune (running approximately 28* at 7000 rpm) but added boost will definitely throw that off by a long shot.
Do you think this would be possible on pump gas without the engine detonating its *** off? I've got pretty good control of the ignitionright now with Ectune (running approximately 28* at 7000 rpm) but added boost will definitely throw that off by a long shot.
#10
Re: Configuring approx. compression ratio with added boost?
Originally Posted by 98vtec
h23vtec
f22 crank (balanced)
Crower 4340 rods (balanced)
wiseco pistons (balanced)
currently using a stock h22a head.
f22 crank (balanced)
Crower 4340 rods (balanced)
wiseco pistons (balanced)
currently using a stock h22a head.