HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   compression test (https://www.homemadeturbo.com/hybrid-tech-8/compression-test-73925/)

nikolass 02-13-2007 01:18 AM

compression test
 
I used the compression calculator and got 9.1:1 on a z6 cpr low comp pistons/eagle h beams I was just wondering if I did a compression test what would it be? would it be lower than stock like 180ish

Guy-Fast 02-13-2007 03:25 AM

Re: compression test
 
lower compression mens lower compression right

Xgenturbo 02-13-2007 05:42 AM

Re: compression test
 
Yes, yes it does.

Approximately ‘Healthy’ numbers –



· 8:1-8.5:1 compression: 150-170 psi per cylinder

· 8.5:1~9.5:1 compression: 170-210 psi per cylinder

· 9.5:1~11:1 compression: 210-275 psi per cylinder

· 11:1+ compression: 250+ per cylinder (highly depends on cams being used)

Got this from Xenocron's pre tuning checklist.

Guy-Fast 02-13-2007 02:06 PM

Re: compression test
 
yes the cam you use does have a factor but for the honda turbo world most people use factory or just a step above so it doesnt have much of any issue


All times are GMT -5. The time now is 12:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands