Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

code 15, what to check

Thread Tools
 
Search this Thread
 
Old Jun 22, 2005 | 05:51 PM
  #1  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default code 15, what to check

im throwing a code 15. i just did an mpfi swap im running a pr4. i dont think any of the wires to the dist are wired wrong. car idols shitty as hell, realy spratic. but will rev finebut if i hold it at any specific rpm it runs like idoling it. any sugestions? is the dist bad?
Old Jun 22, 2005 | 07:58 PM
  #2  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: code 15, what to check

changed ignitor still no luck
Old Jun 23, 2005 | 09:36 PM
  #3  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: code 15, what to check

fucked with dizzy checked all wiring. wiring is fine i beleive unless theres somthing i cant see. orderd a new pm6 because i found one for cheep. any one have a working a6 dizzy (WORKING)
Old Jun 24, 2005 | 08:21 PM
  #4  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: code 15, what to check

Could running a pr4 with the d16a6 distributor make me throw the code 15? or could it just be a bad ecu? i took the distributor apart and checked all the sensors swaped them with my d15b2 dizzys sensors (distributor worked fine) then cleaned everything out inside of it and changed the ignitor? so i think its in the harness or ecu. oh well ill continue posting on the progress just incase anyone else has this problem and i get it figured out
Old Jun 30, 2005 | 05:49 PM
  #5  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: code 15, what to check

switched from pr4 ecu to pm 6, on the pr4 i had a code 43 code 9 and a code 15. on the pm6 all thoes codes are gone and i have a code 14, throttle response is weird. theres like a 1.5 second delay then it hits. i hear a buzzing noise from the ecu also. bad tps?
Old Jul 6, 2005 | 04:37 PM
  #6  
jinxy's Avatar
Thread Starter
0.0 BAR
 
Joined: Feb 2005
Posts: 0
Default Re: code 15, what to check

problem was that i used the wrong clip for the iacv. all fixed and ready for boost
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
90turboteg
General Discussion
10
Aug 18, 2005 09:01 AM
sohc_mshue
Engine Management
26
May 2, 2005 02:48 PM
B16MIKE
Hybrid/Tech
3
Jun 21, 2004 11:43 PM
juli0_bustamante
Hybrid/Tech
3
Jun 21, 2004 03:13 PM
quickcrx702
Hybrid/Tech
10
Nov 16, 2003 12:46 AM




All times are GMT -5. The time now is 05:14 AM.