code 1 and code 16
 

i got this not too long ago when i switched over to a pg7 ECU. mind you i did the dx to ZC wiring conversion with no problem. i put the pm6 and the ECU doesnt throw CEL's..what gives? could it be beacuse i need different injectors? are the ones on my current set up going bad? i think ill go and look over my wiring harness or maybe try another PG7 ECU.

it bugs the ---- outta me but i know i can still run the car...thanks ...julio

Re:code 1 and code 16
 

i dont know about the code 16 but i often get a code 1 when i use the pg7 ecu. the ecu just makes the car run richer i guess, beats me. i think stealth had the same issue.my ex had the same problem.

Re:code 1 and code 16
 

o2 sensor code in an obd0 car is super common. That one wire bull ---- dont cut it. 16 is usually wiring

Re:code 1 and code 16
 

does the 88-89 integra have a resistor box? if so, you may need to add one, or go to high impedance injectors. IE: find some OBD1/2 injectors with plugs.