Clutch suggestions for hyrdaulic b18b, close to 300 wheel. (read F1 clutch kit)
07-11-2007, 02:26 AM
#1
1.0 BAR
Thread Starter
Join Date: Jul 2007
Posts: 378
Clutch suggestions for hyrdaulic b18b, close to 300 wheel. (read F1 clutch kit)
Im running a brand new autozone clutch. 
yeah its ---- i know 
.
i see the F1 clutch kit thread
but i just wanted other opinions beside this clutch. ill probly end up with it.
i didnt plan on this being a problem in my budget so now im asking you guys what i can get away with cheaply.
im running the act 6 puck in my accord, but that shreds trannies like no tomorrow and cost about double what i wanna pay.
im not really familiar with company's, but im afraid im gonna be ripped of on eBay by some fake ----... i need something capable of holding up to 12 psi but will be daily driven at 8 or 9.
SUMMARY: THIS http://cgi.ebay.com/ebaymotors/XTD-S...QQcmdZViewItem
OR WILL THIS WORK http://cgi.ebay.com/ebaymotors/F1-RA...QQcmdZViewItem
yeah its ---- i know . i see the F1 clutch kit thread
but i just wanted other opinions beside this clutch. ill probly end up with it.
i didnt plan on this being a problem in my budget so now im asking you guys what i can get away with cheaply.
im running the act 6 puck in my accord, but that shreds trannies like no tomorrow and cost about double what i wanna pay.
im not really familiar with company's, but im afraid im gonna be ripped of on eBay by some fake ----... i need something capable of holding up to 12 psi but will be daily driven at 8 or 9.
SUMMARY: THIS http://cgi.ebay.com/ebaymotors/XTD-S...QQcmdZViewItem
OR WILL THIS WORK http://cgi.ebay.com/ebaymotors/F1-RA...QQcmdZViewItem
07-11-2007, 11:36 AM
#2
0.0 BAR
Join Date: Jul 2007
Posts: 2
Re: Clutch suggestions for hyrdaulic b18b, close to 300 wheel. (read F1 clutch kit)
I have read quite a number of reviews that said the F1 felt nice when first installed but went to crap in a very short time. Like a month or so. I was going to buy one but becuase of all the bad reports I decided even though I was on a tight budget it wasn't worth the risk or aggravation of changing it 2X, and in the end instead of saving money you will be out $145 extra for the wasted clutch becuase you have to then buy the good one anyways. XTD I haven't heard much about, I went with the TCS 6-puck kit from a sponsor on H-T as I heard a few users say good things about it but nobody wrote any complaints. And it's still only like $235 shipped.
07-12-2007, 09:54 AM
#4
1.0 BAR
Thread Starter
Join Date: Jul 2007
Posts: 378
Re: Clutch suggestions for hyrdaulic b18b, close to 300 wheel. (read F1 clutch k
Originally Posted by ichbinsobose
get an xtd clutch
mines been raped and tracked for over 30k and is still good
mines been raped and tracked for over 30k and is still good
07-17-2007, 11:20 AM
#5
0.0 BAR
Join Date: Feb 2007
Posts: 14
Re: Clutch suggestions for hyrdaulic b18b, close to 300 wheel. (read F1 clutch k
i bought a clutch kit off ebay listed as F1 Racing Xtreme Stage 4 1900LBS Clutch... http://cgi.ebay.com/ebaymotors/F1-RA...42779176QQrdZ1 I use it on my B18B/GSR trans running 10psi on MT slicks. I have never had it slip and I have been running the ---- out of it at the track and on the street. I have a stiffer pedal now (but not bad) and the clutch is a little grabby but still VERY streetable. If I had to guess how many miles ive put on it since the swap, i would guess 5000. I really only drive the car when i go out racing or to the track. I have abused this clutch like none other and it still grabs hard in every gear no matter how hot i get it.
Thread
Thread Starter
Forum
Replies
Last Post
dcg9381
Turbo Parts For Sale
2
08-25-2007 02:41 PM
H22 Accord
General Discussion
56
07-15-2006 08:29 PM
