clutch fork release spring
 

So i put a new clutch in my integra and i take it out for a test drive and everything is good and about 3days later i go to drive it i push in the clutch and its like there is nothing there. I got it in my shop and pulled it a part and the clutch fork release spring has a tab broke off. I got a new one and it did the samething what the ---- is going on.

Here a mspaint

Attachment 17390

Re: clutch fork release spring
 

i think the force you are pushing against when clutching is the pressure plate, did you bleed the line?

Re: clutch fork release spring
 

its a cable clutch

Re: clutch fork release spring
 

BUMP still havent found anybody that knows what the ---- is going on with this thing. Everyone that i have talked to havent seen anything like it before. Someone on here has to know.

Re: clutch fork release spring
 

What PP are you using? Cable trans with the HD PP break pedal assemblies all the time. Ive replaced everything including clutch fork, return spring, pedal, pedal assembly, cable, and the cable stay that mounts on the trans. I cant walk w/o feeling a pain in my left foot from daily driving my EF in NYC. For some strange reason my pedal is abnormally stiff.

Re: clutch fork release spring
 

its just a ebay stage1 clutch i dont think that it has a HD PP.

Re: clutch fork release spring
 

I think i figured this ---- out i took the pp and clutch off the other night to look everything over and when i put i back on the fingers of the pp went form / to l they shoudnt straiten out like that right. I traded my buddy flywheels a while ago and the one i have now is a 2 step. I think it needs to be flat someone let me know if im wrong.

Thanks Kuipers