cheap forged pistons?
so now we have the hookup on rods thanks to tuner toys, I was thinking "mad sicc, I can get the piece of ---- ls block finished now" and then I go looking for pistons, my race engineering catalog lists the cheapest pistons for LS for $409 (wiseco), that's not that cheap. ebay isn't turning up much stuff either. so does anybody know of any places to get cheap forged pistons? or am I going to end up spending $400 +
|
Re:cheap forged pistons?
I have some brand new CP pistons I am selling for 10 bucks, but they are for a d-series motor and won't work in your car... sorry. ;)
|
Re:cheap forged pistons?
Pat I have paypal waiting!
|
Re:cheap forged pistons?
Actually I was just making fun of Kyle because he has a b-series. I don't really have any pistons for sale. :P
|
Re:cheap forged pistons?
I know you were kidding. ;)
|
Re:cheap forged pistons?
cheap and forged pistons dont really belong in the same sentence unless they are used. my srps cost 380 something from race engineering. best price ive found
|
Re:cheap forged pistons?
Originally Posted by mahcivic
cheap and forged pistons dont really belong in the same sentence unless they are used. my srps cost 380 something from race engineering. best price ive found
|
Re:cheap forged pistons?
How much are the Endyne Rollerwaves? Wiseco makes em for Endyne so quality shouldn't be an issue and Endyne usually has pretty good prices on their stuff.
|
Re:cheap forged pistons?
i believe they're around 400 as well
|
Re:cheap forged pistons?
with rings and shipping (retail) your looking around 500 bones.
|
Re:cheap forged pistons?
vitaras to the rescue!!!!! :D
and yeah i know he's b-series, let him get creative. :P |
Re:cheap forged pistons?
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!! :D
I think this thread is about forged pistons.. Not shitty ass low compression 100 dollar cast pistons like vitaras. ::) |
Re:cheap forged pistons?
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1 BORE: 3.189 STROKE: 3.433 ROD LENGTH: 5.429 COMP HEIGHT: 1.181 POSTON WEIGHT: 263 TOP RING: 1.0MM 2ND RING: 1.2MM OIL RING: 2.8MM |
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!! :D
I think this thread is about forged pistons.. Not shitty ass low compression 100 dollar cast pistons like vitaras. ::) |
Re:cheap forged pistons?
Don't worry they will be fine it your setup.
|
Re:cheap forged pistons?
Originally Posted by Whitey
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1 BORE: 3.189 STROKE: 3.433 ROD LENGTH: 5.429 COMP HEIGHT: 1.181 POSTON WEIGHT: 263 TOP RING: 1.0MM 2ND RING: 1.2MM OIL RING: 2.8MM |
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!! :D
I think this thread is about forged pistons.. Not shitty ass low compression 100 dollar cast pistons like vitaras. ::) |
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by Whitey
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1 BORE: 3.189 STROKE: 3.433 ROD LENGTH: 5.429 COMP HEIGHT: 1.181 POSTON WEIGHT: 263 TOP RING: 1.0MM 2ND RING: 1.2MM OIL RING: 2.8MM |
Re:cheap forged pistons?
Originally Posted by Kyle
that sucks for me, my block is .020" over, I'm going to need 81.5mm pistons, correct?
I don't know. there's all the specs, go check your bore and if they will fit than send me money ;) I ordered them for a GSR but specs are specs. |
Re:cheap forged pistons?
Originally Posted by Whitey
Originally Posted by Kyle
that sucks for me, my block is .020" over, I'm going to need 81.5mm pistons, correct?
I don't know. there's all the specs, go check your bore and if they will fit than send me money ;) I ordered them for a GSR but specs are specs. |
Re:cheap forged pistons?
|
Re:cheap forged pistons?
are you serious or are you kidding. i'll give you $20 right now
Originally Posted by beerbongskickass
I have some brand new CP pistons I am selling for 10 bucks, but they are for a d-series motor and won't work in your car... sorry. ;)
|
Re:cheap forged pistons?
sorry i just read the hole thing....nevermind.
|
Re:cheap forged pistons?
81mm = 3.18897
81.5mm = 3.208655 |
Re:cheap forged pistons?
Fast2cam- i like ur old school civic.
|
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!! :D
I think this thread is about forged pistons.. Not shitty ass low compression 100 dollar cast pistons like vitaras. ::) im gonna start www.vitarapistonsarenotforged.com |
All times are GMT -5. The time now is 03:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands