can anything be done to help my b16 head
well the oil pump broke on my b16 and im pritty shure it trashed the head. there are grooves worn into the head and the caps on the timing belt side of the motor. so besides pulling all the components out of the head and having a big paper wieght,is there anything i can do. :'( :'( :'(
|
Re:can anything be done to help my b16 head
post some pics
|
Re:can anything be done to help my b16 head
Originally Posted by alwaystootall
there are grooves worn into the head and the caps on the timing belt side of the motor.
|
Re:can anything be done to help my b16 head
there really are no bearings in the head. the cams ride in the alum. no oil= cams start digging into head :(
|
Re:can anything be done to help my b16 head
They might be able to be polished... bring to a good machine shop and ask...
|
Re:can anything be done to help my b16 head
if the grooves/wear is bad and it gets polished, the clearances might be out of spec. it's tough to say, but just prepare for the worst.
|
Re:can anything be done to help my b16 head
maybe you should just sell it to me for cheap ;)
|
Re:can anything be done to help my b16 head
Damn you jeff thats why I wanted pics :)
|
All times are GMT -5. The time now is 09:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands