cam gear timing

Reply Subscribe

Thread Tools

Search this Thread

10-13-2005, 03:21 PM

DeleriouS

1.5 BAR

Thread Starter

Join Date: Aug 2004

Posts: 710

cam gear timing

i am having trouble with my ------- cam gears. something isnt right.....when i line up the arrows on the camgears, and then do 1 revolution by hand, the camgears are WAY off...like ------- 4-5teeth. what am i doing wrong

10-14-2005, 12:20 AM

cmyrex

0.5 BAR

Join Date: Aug 2005

Posts: 118

Re: cam gear timing

when you have the camgears timed do you have the crank pulley on tdc mark the ones on the bottom should look like this lll l there on the crank pulley

10-14-2005, 09:59 AM

ghettoturbo

Guest

Posts: n/a

Re: cam gear timing

you are turning it counter-clockwise right?...with the tensioner set-up right?

10-15-2005, 12:11 AM

DeleriouS

1.5 BAR

Thread Starter

Join Date: Aug 2004

Posts: 710

Re: cam gear timing

got it, you have to have someone hold the camgears from ------- turning when your puttin on the belt, the exhaust one kept on movin on me and throwin me way off, but i am good now i think....my car started but it is really sick....i try flooring it and it takes 5 seconds or something to get it past 3500rpms, its horrible. i messed around with the dizzy, still nothing. i think i have a vaccuum leak somewhere but i am not sure....any other ideas? i am going to be doin a compression test soon. hopefully this weekend. its ------- killing me

10-15-2005, 12:52 PM

DeleriouS

1.5 BAR

Thread Starter

Join Date: Aug 2004

Posts: 710

Re: cam gear timing

also my tach sputters a lot, like it goes past 8000rpms when i know the motor isnt going that high, its will just sputter sometimes and than jump
i am going insaine