Cam Gear question
 

I have 1988 Acura Integra(D16A1) cyclinder head. Everyone was saying you could use any b-series aftermarket cam gears off set was slight. Well, that may be true for the actual ZC head but for the piece of ---- american ZC(D16A1) head which is what i have and an acutal ZC block. The cam gears are not small like the b-series they are big like the sohc's they seem to be the exact same size. My question is I was woundering if i could use 2 AEM sohc gears in place of my ZC(D16A1)'s cam gears? Looking at the cam gears they seem like they would work but i was woundering if anyone would know if this would work or not. Any insight on this would be greatly appreciated. Thanks.

Re:Cam Gear question
 

id say yes...just due to the fact that my friend tried 2 sohc camgears on his and they worked. but i dont know too much about that. but thats what he said.

Re:Cam Gear question
 

i thought all dohc cam gears were the same and all sohc's were the same. so youre saying the zc has bigger gears like a sohc? the dohc have smaller cam gears! i dont know? i thought the dohc's were all the same for hondas, i could be wrong?!

Re:Cam Gear question
 

Not this DOHC it has bigger cam gears then b-series, they are alittle bigger then SOHC gears. Well i guess ill try it if i ---- my motor up ill blame your friend for lying. j/k

Re:Cam Gear question
 

i only the b series cam gears work on certin blocks. Jeff has done this mod sofar.