HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Bushing clank? (https://www.homemadeturbo.com/hybrid-tech-8/bushing-clank-79208/)

MAJORAHOLE 06-18-2007 12:54 PM

Bushing clank?
 
i did some searching, but was inconclusive. i have a clunk(metal hitting metal) nosie while driving and hitting modererat bumps in road. is this a worn bushing possibly? i also feel weird movment when i back out of my driveway. i pull out, stop turn the wheel and then put in gear, let out clutch slowly, and i can fell the right pass fron tire start to move before the car actually starts going. i know that somethins fucked. i though it was just my aliagnment(sp?) but now i get a noise on bumps too. are there any bushings that go out often in the 5gen's that i don't know about?? thanks

sikcrx89 06-18-2007 10:21 PM

Re: Bushing clank?
 
sounds like it could be a ball joint or lca bushings

Ravage70 06-18-2007 11:30 PM

Re: Bushing clank?
 
balljoint most likely
take off both wheels and check for loseness
dont wait too long or one of them is gonna pop on the highway like it did on mine
not pretty

MAJORAHOLE 06-19-2007 07:58 AM

Re: Bushing clank?
 
ball joints are a bitch aren't they??
is it most likely the lower one??

danronian 06-19-2007 11:50 PM

Re: Bushing clank?
 

Originally Posted by MAJORAHOLE
ball joints are a bitch aren't they??
is it most likely the lower one??

Could be either. Tops are easier to replace since they don't need to be pressed in, but the uppers also cost twice as much since they are the entire control arm...


gen4acclude 06-20-2007 11:58 AM

Re: Bushing clank?
 
upper control arm bushing is the way im leanin rather then a ball joint but hay with out lookin at the car its ahrd for any of us to really help

MAJORAHOLE 06-20-2007 12:21 PM

Re: Bushing clank?
 
ya, when i jack it up, and try to shake the huba and ----, i hear nothing.(of course)
i was thinkin either uper, or the tie rod ball joint.

gen4acclude 06-20-2007 12:44 PM

Re: Bushing clank?
 

Originally Posted by MAJORAHOLE
ya, when i jack it up, and try to shake the huba and ----, i hear nothing.(of course)
i was thinkin either uper, or the tie rod ball joint.

i had a sound like that and it ended up being the upper control arm bushings

MAJORAHOLE 06-20-2007 01:31 PM

Re: Bushing clank?
 
i suppose it could be, but theose are aftermarket peices i got with the shitty progress camber kit, so idk if they are the same size as stock to replace.?

HMTguy 06-20-2007 03:09 PM

Re: Bushing clank?
 
What pieces do you have?

If your tire wiggles left and right when you have the car jacked, then it's a tie rod end.

If the tire wiggles up and down then it's ball joint(s).


All times are GMT -5. The time now is 05:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands