building a mini me
 

so i was doing a burnout today and i spun a bearing... so i just picked up a D15 with the mpfi and i wanna toss my Z 6 head with suzuki pistons on it...

my questions..

1. can i reuse the rod, main and head bolts if i just retorque them a little tighter than stock and use loc tite blue?
2. will the D15 botom end rev to 7200 just as easy as the Z6 bottom end?
3. will the D15 water pump and oil pump work with my Z6 timing belt and cam??
4. thanks lol

Travis

Re: building a mini me
 

1.)yes but not recommended, just get ARP bolts. good investment!
2.)i believe the D15 cant rev up to 7200 like the z6 can. 6500-6800 tops
3.)use the same timing belt as the head when doing a mini me, stick w/ d15 water pump & oil pump

make sure to remove oil jets

Re: building a mini me
 

i don't think the vitara pistons will work the pistons will stick out from the block i think...unless it's a JDM d15

Re: building a mini me
 

im just gonna throw the stock stuff back in.. its all good.. im gonna use this as a replacement and just rebuild the Z6 with TT rods and vitara pistons.. over the winter.. then she'll be ready for 15 psi next spring

Travis

Re: building a mini me
 

post pix

Re: building a mini me
 

THE WORSHOP
http://memimage.cardomain.net/member...44_12_full.jpg
d15 PISTON
http://memimage.cardomain.net/member...44_13_full.jpg
HOW DO I CLEAN THE CARBON OFF THIS THING??
http://memimage.cardomain.net/member...44_14_full.jpg
MAINCAPS AND ASSEMBLIES
http://memimage.cardomain.net/member...44_15_full.jpg
EMPTY BLOCK
http://memimage.cardomain.net/member...44_16_full.jpg
GREEN CIVIC IS ALSO GETTING A MINI ME WITH A Y8 HEAD (ROOM MATES BEATER)
http://memimage.cardomain.net/member...44_17_full.jpg
CIVIC NATION
http://memimage.cardomain.net/member...44_18_full.jpg
ROOMIES DAILY DRIVER
http://memimage.cardomain.net/member...44_19_full.jpg