bore & stroke?
 

Do you guys know of any good places to find information on how to do this? Or if you are a good source, could you post :) What all is involved, what parts do i need?

Re:bore & stroke?
 

how to do bore and stroke?

uh what...

im confused here.

Re:bore & stroke?
 

increase the bore and stroke????

buy a diff engine ;P

Re:bore & stroke?
 

bore can be increased at a machine shop... but very risky with small displacement engines especially our hondas because the cylinders are already so ------- close to each other. You'll have to resleeve afterwards to, and buy new pistons.
The stroke is the distance up and down, I am not fully sure on how to change that, I'd guess by notching the block?

Re:bore & stroke?
 

you dont necessarily need to resleeve it...theres just a limit to boring...and you increase stroke with a new crank

Re:bore & stroke?
 

you can inscrease the bore by having a machine shop do it, and like chacko said, they're took close anyways.

you can stroke them by buying a different crank and getting shorty pistons and longer rods.

Re:bore & stroke?
 

what crank would I use? what rods?

Re:bore & stroke?
 

expensive ones ;) I know that JUN has a stroker kit.

Re:bore & stroke?
 

you can buy stroker kits buy a whole bunch of places... Just search online or go out and read a magazine.