Bore stock throttle body
I would like to know for one if it would be worth it and for 2 how much would a machine shop charge for somthing like this because i see one on ebay, a stock z6 throttle body ported and polished to 63mm for like $100. Can i get it done for cheaper
|
Re: Bore stock throttle body
dude i sell you my 60mm h22 tb for 45 shipped. 100 is a lot.
|
Re: Bore stock throttle body
but will that work on a d15b7??
|
Re: Bore stock throttle body
Your throttle body is the same size as a z6. Get a z6 intake manifold which looks the same but has bigger runners.
You could also pick up a B-Series throttle body that is a bolt on for much less. If you do increase the tb, the intake mani needs to be matched. If you don't want to do that , you can just get a taper bore. |
Re: Bore stock throttle body
I see thank you but do you know how much somthing like that would cost for a machine shop to do?
|
Re: Bore stock throttle body
Also you said a b-series is a bolt on, does that mean the sensors and coolant lines will hook up the same also? or The wires will and coolant i will have to connect together w/o running through the TB
Is this a good deal for a z6 IM http://cgi.ebay.com/ebaymotors/civic...QQcmdZViewItem |
Re: Bore stock throttle body
J35's have a 65mm throttle blade that can be fitted in a B-series 58/60mm housing. If I bring the 65mm blade and a TB, the local machinist charges me $40 to do this.
65mm leaves a B-series TB pretty thin-walled, I daresay you won't be able to do this to any D-series TB. Any B-series TB is going to require port matching to the IM, and 65mm might be more than you can port some of the D-series manifolds... I am *totally* not sure of that last bit, so take it with a whole cellar of salt. |
Re: Bore stock throttle body
lol thanks, i might just take my TB tot he machine shop and get it bored then it will make a difference then i will buy a ported d16z6 mani.
|
Re: Bore stock throttle body
I'd seriously just run a 60mm B-series unit and not ---- around. If boosted, 60mm TB isn't going to be a bottle neck on pump gas, and if NA the D-series port/valve size/bore is your limitation not a 60mm TB.
|
Re: Bore stock throttle body
Well i am boosted, ya know what if a stock b series is 60mm then that will work for me but what is the stock bore of the inlet for the d16z6 IM?
|
All times are GMT -5. The time now is 06:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands