djvillin420

so i installed a new clutch today. disc and pressure plate and got my flywheel re surfaced. i took my time putin everything together so i made sure i did it right...so 25 miles in to it and i was driving and the tranny just reved up so i pulled over and i can get it into gear but when i release the clutch nothing happens. so i got it towed home and on the truck that took it home there was about a Qt of tranny fluid on the bed.. i am thinkin i just blew up my tranny... just any sujestions would be help full of what i should look for when i take everything apart.. please i really need help im not good with trannys. also if it is fucked any one have another ZC L3 for sale maybe? ...



Thanks guys

Bone1

sounds like you failed to fully install one of the axles and it popped out.

widebody93

You stupid ***. You can install a clutch thats easy as hell to do. But yet you get in a hurry and not seat the axles all the way into the diff. So you go for a stroll thinking your vin diesel and all. Hook a hard turn and then your life almost ends and you head to mexico. But it all turns out that your dumb *** forgot to snap the axle all the way in. Now you have to figure out how your going to get back into the states. Or just wait for two episodes and a failing career to show up in the fourth making of. . . . . Well you get the picture. Your a dumb nig ger.

onlyflash944

LOL @ ^

http://4q.cc/index.php?pid=fact&person=vin

sounds like an axle to me too. any grinding noises when you'd let the clutch out?

Sepheroth86

Word.

I agree with the bone.

Ive had the same problem before.

Also, sir bone if you get this, PM me when you have some time to redo a B hydro trans and put a OBX or something in it.

Word. I am in no rush.

djvillin420

u guys are funny. thanks for the help. i took it out yesturday and the stap ring was a lil stretched so i put on a new one put everything back together and it works fine now. i know i know IM A DUMBASS!!!!

widebody93

What do you need REDONE or do you only need a LSD installed
I have a Si 2000 for sale

djvillin420

i am still have this grinding rotating grinding noise tho its not that loud. but i notice it. i did the throw-out bearing. the tranny still pulls really strong. could that be my LSD going out? it only makes the noise when i softly acceloate.and the new clutch is slipin in first gear but only when i start from a stop... it does not slip at high RPM's..could i have oil leakin on it what would be the seal that would be causein my leak problem?

widebody93

Grinding could be anything, leaks that are possible
Axle Seals
The Hondabond gasketmaker for the gear box cover that seals it to the bell housing could be weathering away
Shift linkage seal

Those are the most common



Does the grinding happen all the time or when you first take off, could be the Diff, could be first gear is shearing
And if it hums when on the throttle but goes away when you release it, Sounds like the Ring gear is worn too.

djvillin420

mmm sounds like i just need to go buy a new tranny. thats GGAAYYY.. but thanks for all the ideas and yea it does hum sometime and the grind happend in all gears.. ohh well atleast ZC trannys are cheap