bent speed sensor gsr tranny
idk it looks ------- bent i just got the car back from a friend and it looks like the speed sensor is dented to one side
can you ---- up a tranny by bending a speedsensor.. or will it not be able to do any damage to the tranny.. aka can i just bent it back and replace the speed sensor.. thats if its bent at all.. idk ive had a long ------- day heres a pic of the base of the speed sensor and you can see throught the crack http://www.t-mobilepictures.com/phot...heytbkhwse3qjn |
Re: bent speed sensor gsr tranny
Great pic :X
|
Re: bent speed sensor gsr tranny
awesome.. another shitty pic ;D
http://www.t-mobilepictures.com/phot...2lohoc6d2orggr im going to try to grab another picture in a second :X |
Re: bent speed sensor gsr tranny
|
Re: bent speed sensor gsr tranny
i cant beileve im that ------- worthless
anyways just answer the ------- question lets say a speed sensor was bent 5-10 degrees is that enough to ---- up a tranny |
Re: bent speed sensor gsr tranny
I've seen cave drawings that had more detail then those pics buk. lol. If it's bent then the shaft inside could be bent and locked in place. Causing the plastic gear that's on it to not turn and could just get chewwed up in the tranny and all those plastic peices be floating inside your tranny. Pull it out and see if it still spins freely. I wouldn't risk it and possibly damage the tranny. GSR trannies aren't exactly cheap.
|
Re: bent speed sensor gsr tranny
Originally Posted by stillnoturbo
I've seen cave drawings that had more detail then those pics buk. lol. If it's bent then the shaft inside could be bent and locked in place. Causing the plastic gear that's on it to not turn and could just get chewwed up in the tranny and all those plastic peices be floating inside your tranny. Pull it out and see if it still spins freely. I wouldn't risk it and possibly damage the tranny. GSR trannies aren't exactly cheap.
but it is chewed up badly.. not bitten off chewed up but like chewing pen chewed up now using my uncontrollable knowledgabilities i ASSume that even if the speed sensor was bent by say a engine hoist chain.. since the plastic gear isnt THAT damaged i dont think that the plastic gear can have enough force to ---- up or bend anything inside the tranny :'( amirite or amirite :P http://www.t-mobilepictures.com/phot...xljyyl9veyeg6o http://www.t-mobilepictures.com/phot...o9ht4l4byzabzy now lets talk about something else.. i have no oil in the engine and tranny and had removed the shift linkage while the tranny was still in gear.. i was too lazy to get under the car and put it in neutural.. so i had someone in the car holding the clutch down while i pushed the car.. does this mean engine wasnt rotating lets say theoretically if a clutch were to be dropped while the car was being pushed could this cause any damage to the engine :X |
Re: bent speed sensor gsr tranny
can i use my b16a speed sensor in my gsr..
|
Re: bent speed sensor gsr tranny
WTF buck, you starting to sound like me in this post :l :l
but if you rotate the engine a little bit it should be fine even without any oil in the pan, the longer the oil has been out of the pan, the more oil has actually dried, or worked its way out of the bearings and what not.. so if you just emptied the pan, you should be ok.... I rotated my engine every week while it sat in the garage, over winter last year, and it is all good, as far as that issue is concerned.. and i did notice that i had my car running while on jack stands, lmao, and even in nutral that bitch was slowly spinin some tires...lmao but with it in gear, and the clutch pressed they were moving a little bit as well, so it is possible it could rotate the engine, but highly unlikely unless if you" dropped the clutch." |
Re: bent speed sensor gsr tranny
the oils been empty for 2 months now :(
|
Re: bent speed sensor gsr tranny
Don't run the fucked up VSS. I've never pulled a VSS out of a bad trans that looked chewed like that. They are cheap, just get another. :y
|
Re: bent speed sensor gsr tranny
Originally Posted by buk9tp
i cant beileve im that ------- worthless
|
Re: bent speed sensor gsr tranny
Originally Posted by danronian
Don't run the fucked up VSS. I've never pulled a VSS out of a bad trans that looked chewed like that. They are cheap, just get another. :y
damn it i wish someone would give me a straight answer :'( |
Re: bent speed sensor gsr tranny
Originally Posted by buk9tp
well the trans isnt fucked atleast i hope not :(
damn it i wish someone would give me a straight answer :'( If you want pieces of plastic all over the inside of your trans, sure, run it. |
Re: bent speed sensor gsr tranny
Originally Posted by danronian
Not sure how my answer wasn't straight...
If you want pieces of plastic all over the inside of your trans, sure, run it. im talking about my tranny.. is there any pernament damage? im talking about replacing the vss and running the tranny is that fine the reaon its chewed up is because it was bent.. did that ---- up anything in the tranny? i WILL replace the VSS is the tranny fine? |
Re: bent speed sensor gsr tranny
trannys ---- ill buy the gears from you for the cost of shipping :6
|
Re: bent speed sensor gsr tranny
Originally Posted by 88dx
trannys ---- ill buy the gears from you for the cost of shipping :6
so i take it that the tranny is fine.. right? since the plastic gear isnt strong enough to ---- up anything inside the tranny? |
Re: bent speed sensor gsr tranny
you got it ;)
Id say if there isn't plastic missing, like you said , you are fine, the plastic isn't strong enough to strip the metal gears. Put a new vss in and call it good. If you really want to you could flush your trans real quick, and give your self that extra bit of confidence. |
Re: bent speed sensor gsr tranny
I might have a metal geared GSR VSS laying around........92-93 JDM
|
Re: bent speed sensor gsr tranny
lol
|
Re: bent speed sensor gsr tranny
Originally Posted by Mista Bone
I might have a metal geared GSR VSS laying around........92-93 JDM
|
Re: bent speed sensor gsr tranny
you'd ---- up a wet dream no mater which VSS you'd use.
|
Re: bent speed sensor gsr tranny
ok i just pulled out the cotter pin and the entire plastic gear assembly came out.. is it safe to run the tranny without a vss gear at all
might be a stupid question but yeah id rather be safe then sorry... |
Re: bent speed sensor gsr tranny
no speedo = no madtyte VTEC
|
Re: bent speed sensor gsr tranny
Originally Posted by Mista Bone
no speedo = no madtyte VTEC
But stock ecu ya no speddo=no vroooommmm and that means no babes to take to panda express for orange chicken |
Re: bent speed sensor gsr tranny
Originally Posted by chris
But stock ecu ya no speddo=no vroooommmm and that means no babes to take to panda express for orange chicken
|
Re: bent speed sensor gsr tranny
running neptune rtp so yay ;D
|
Re: bent speed sensor gsr tranny
|
Re: bent speed sensor gsr tranny
next you'll complain about getting a speeding ticket and how do I fix my broken VSS.......
|
Re: bent speed sensor gsr tranny
i fix it by replacing it :P
i just want to see if i can get this thing running tomorrow or not ;) |
Re: bent speed sensor gsr tranny
it's now tomorrow, it it running yet?
I'll bet it's not until next month you have it running :) |
Re: bent speed sensor gsr tranny
Originally Posted by buk9tp
i cant beileve im that ------- worthless
you have this many posts and you still dont know how to work on a car lol |
Re: bent speed sensor gsr tranny
Originally Posted by Mista Bone
it's now tomorrow, it it running yet?
I'll bet it's not until next month you have it running :)
Originally Posted by nicko360
you have this many posts and you still dont know how to work on a car lol |
Re: bent speed sensor gsr tranny
Originally Posted by buk9tp
its stupid wiring bullshit thats got me fucked up right now :(
uhhhh i changed the headgasket on a b16a and set the timing... pretty much all by myself |
Re: bent speed sensor gsr tranny
buk still has that bad taste in his mouth from blowing on the valve stems :)
|
Re: bent speed sensor gsr tranny
Those weren't valve stems Bone. :P
|
Re: bent speed sensor gsr tranny
Originally Posted by stillnoturbo
Those were bone stems, val :P
|
All times are GMT -5. The time now is 05:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands