Bad sensor??
 

i just threw on a turbo setup on my zc and i get one cel,,, code 9 #1 cylender position.Well i put the timng belt on and went over everthing and all marks line up.. ALso it runs very good,, no misfiring etc. Bad cam angle sensor??? need some input,

Re:Bad sensor??
 

what ECU and what car?

Re:Bad sensor??
 

89 integ ecu in an 88 hatch

Re:Bad sensor??
 

correct me if im wrong some1. But i thought I heard that the ZC doesnt crank position sensor and the 1g teg's do?

Re:Bad sensor??
 

i reset the ecu and turned it on and it throws a code 4 which is crank angle sensor and misfires like crazy,, is that sensor in the dizzy or the one thats next to it on the exhaust cam.

Re:Bad sensor??
 

i went to a junk yard and stole some crank angle sensors and still it throws a code 4. ?? what could be wrong. i tthink im gonna blow my car up.

Re:Bad sensor??
 

there is a good chance that the 3 sensors i got are bad becuase they are junkyard. But what else could be wrong,, i rewired the sensor directly to the ecu meaning that the wiring is good, so to my knowlege it comes down to either the ecu or the sensor,,, i want to make sure its the sensor because its like 160$. Anyone have input.

Re:Bad sensor??
 

why dont you just get a rebuilt distributor? the crank angle sensor is on the distributor(at least it is on crx's, should be on yours too). i paid like $150 for a rebuilt distributor from autozone with a lifetime warranty. my crank angle sensor ended up getting fucked up and kept giving me check engine lights. i returned the distributor to autozone, they gave me a new one, and then i didn't have problems with it anymore.

Re:Bad sensor??
 

4 out of 4 sensors are bad? sounds like a long shot. I'd bet on wiring. maybe you have to change some wires around???